Floline Corporation, promoted by a young entrepreneur over
more than a decade ago is a trusted name in valve,
Flanges & Fittings. We are serving the Process Industry in the country
with a wide range of Quality assured products and services.
Apart from standard designs we can also take up custom built
products subject to Economical & Technical viability.
Apart from
stringent in home stage inspection by qualified Engineers we
can also offer IIIrd party inspection or clients Inspection
for other products.
A wide range of
standard valves, flanges & fittings are offered for Ex-stock
to meet urgent requirements.
GENERAL TECHNICAL INFORMATION ON VALVES
Excellent work & proven design features are the very basis
of the valves. standard
valves are with cast end pieces, bodies & bonnets. However
on request valves are manufactured from rolled or forged bar
stock materials as well.
CAST VALVES
Casting material conforms to relevant ASTM material
specification. Casting are of highest quality, well
proportioned and defect free with heat mark. Wall thickness
are
of very liberal nature confirming to ANSI B 16:34 Material
Test and heat treatment certificated are furnished to the
client.
BAR STOCK VALVES
On request high pressure valve or tailor made valves are
machined from Carbon Steel, Stainless Steel higher, Alloy
materials bar stocks.
MATERIAL OF CONSTRUCTION
Cast, Carbon Steel, Stainless Steel & Cast Alloy, Nickel,
Monel, Hast alloy B & C or any
other material as per the clients request.
END CONNECTIONS
Any of the following end connections are provided as may
be suitable for
the clients requirement.
|
Flanged end |
-
|
to ANSI B 16.5 RF with serrated finish |
| |
-
|
to DIN standard 2532, 2533 |
| |
-
|
to British standard BS.10 Table D,E,F |
|
Butt-weld ends |
-
|
to ANSI B 16.25, B 16.9 |
|
Socket weld ends |
-
|
to ANSI B 16.11 |
|
Screwed ends |
- |
to ANSI B 16.11 BSP, BSPT or NPT |
|
Face to Face dimensions to ANSI B 16.10, BS 2080 |
RATINGS
ASA 150 # 300 # 800
DIN - PN - 10,16,25,40
SIZE RANGE
Flanged end : 15 mm to 600 mm
Screwed end : 15 mm to 50 mm
Welded end : 15 mm to 50 mm
INSPECTION
We manufactured under any third party inspection or
clients own inspection
to their satisfaction.
TESTING
Each valve is hydrostatically tested as per ANSI B 16, 34,
BS, DIN or Equivalent codes as per the ratings, Pneumatic
test is also offered.
SUGGESTING
While installing valve on a dirty contaminated systems
install a strainer on upstream
side to minimize maintenance.
|
