Steam Traps and Pipeline Accessories

 

Steam/ Condensate Manifolds

Steam/ Condensate Manifolds Pennant Manifolds facilitate effective condensate collection/ steam distribution, with flexible configuration, and neat, easy-to-maintain construction. Properly-sized and located condensate collection manifolds and steam distribution manifolds can lead to more efficient collection and return of condensate in a plant, and increase the competence and consistency of steam trap maintenance and repair programs.

 

 

Materials Rating Manifold Size Tracer Line
Pressure Parts – Forged Carbon Steel Internals – Stainless Steel #300, PN63 DN40- Socket Weld to ASME B16.11 DN15 to DN25 – Screwed/ Socket Weld to ASME B16.11

Strainers

Strainers

Pennant Y-strainers for industrial applications are available with S.S. perforated screens. Pennant Y-strainers are an ideal choice to filter and subsequently remove out pipeline debris such as scale, rust and other impurities in the media.

 

Size Materials
DN15 to DN300 Cast Iron/ Ductile Iron / Carbon Steel/ Stainless Steel

 

Moisture Separators

The Pennant moisture separator (PMS) is a baffle type separator used for the removal of moisture content in steam which can be drained out as condensate.

Size Materials
DN25 to DN250 Carbon Steel/ Stainless Steel/ Cast Iron/ Ductile Iron

Compact Module

Compact Module

All-in-one compact unit – trap isolation, test, vent, and blow-down valves with bolted on steam trap. Replaces bulky conventional piped assemblies

In-built bypass arrangement – no additional piping required

Fully repairable piston valves for isolation

Only 2 welds to fit Forged carbon steel construction

Steam Trap Modules

The Pennant trap module is a complete system which includes isolation valves, by-pass valves, and trapping device, interconnected with pipes, flanges, reducers, elbows, etc. In response to specific requests, strainers, sight check, check valve, etc. could be supplied duly fitted into the system.

Balanced Pressure Thermostatic Air Vent

PT31AV

PT31AV Balanced Pressure Thermostatic Air Vent with an in-built strainer. Complete SS construction. End conns.: Screwed NPT / BSPT / BSP / SW

PMO (bar) TMA (ºC) Capacity at PMO (m3/hr) Size
22 / 220 10 DN8~20

Float Type Air Eliminator

PAE61

Float Type Air Eliminator Float type Air Eliminator. Cast Iron construction. SS Internals.
End conns.: Screwed NPT/ BSPT / BSP


PMO (bar) TMA (ºC) Air Cap. at PMO (m3/hr) Size
10.5 / 220 23.64 DN15, 20

Float Type Air Eliminator

PAE10

Float Type Air Eliminator Float type Air Eliminator. Cast Iron construction. SS Internals.
End conns.: Screwed NPT/ BSPT / BSP


PMO (bar) TMA (ºC) Air Cap. at PMO (m3/hr) Size
21 / 220 9.63 DN15~25

Liquid Drain Traps

PD11

Compressed Air Drain Trap (Aerodyne) with inbuilt strainer, SS construction.
End conns.: Screwed NPT / BSPT / BSP / SW


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
42 / 426 862 DN15,20

Liquid Drain Traps

PD61

Liquid Drain Traps Float type Liquid Drain Trap. Cast Iron construction. SS Internals.
End conns.: Screwed NPT/ BSPT / BSP


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
14 / 220 625
659
DN15, 20
DN25

Liquid Drain Traps

PD21

Liquid Drain Traps Inverted Bucket Steam Trap. Cast iron construction. SS Internals. Vertical configuration.
End conns.: Screwed NPT / BSPT / BSP


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
17.5 / 220 350 530 2500 2600 DN15 DN20 DN25 DN40

Liquid Drain Traps

PD62

Liquid Drain Traps Float type Liquid Drain Trap. Cast Steel construction.
End conns.: Screwed NPT / BSPT / BSP / SW / FL


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
14 / 220 625
1529
DN15, 20
DN25

Liquid Drain Traps

PD63

Liquid Drain Traps H Pattern Float type Liquid Drain Trap. Cast Iron construction; SS internals,
End conns.: Screwed NPT / BSPT / BSP


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
10.5 / 220 1025
1800
DN20, 25
DN32

Liquid Drain Traps

PD65

Liquid Drain Traps Float type Liquid Drain Trap. Cast Iron construction; SS Internals.
End conns.: Screwed NPT /BSPT / BSP


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
14 / 220 1529 DN25

Liquid Drain Traps

PD66

Liquid Drain Traps Float type Liquid Drain Trap. Cast Iron construction; SS Internals.
End conns.: Screwed NPT /BSPT / BSP


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
4.5 / 220 18360 DN40, 50

BDV – Blow-down Valve

BDV

Complete SS construction, AISI 304, (Suitable for blowing out dirt from strainer element)

PMO (bar) TMA (ºC) Size
42 / 426 DN15, 20, 25

IT – Isotub

IT - Isotub

IT – Isotub Complete SS construction, AISI 304 (Suitable for outdoor applications on TD traps)
Available for all models & sizes of TD traps.

PDF10 – Diffuser

PDF10

PDF10 – Diffuser Diffuser - Complete SS construction.
End conns.: Screwed NPT / BSPT / BSP / SW. Sizes: DN15, 20
* Suitable for use with traps rated upto PN63

Universal Connector

PU11

Universal Connector Universal Connector. SS construction, A351 Gr. CF8.
End conns.: Screwed NPT / BSPT / BSP / SW (Suitable for mounting PT18 traps)

Universal Connector

PU11Y

Universal connector with in-built strainer. SS construction, A351 Gr. CF8.
End conns.: Screwed NPT / BSPT / BSP / SW. (Suitable for mounting PT18 traps)


PMO (bar) TMA (ºC) Size
42 / 426 DN15, 20

Pipe Union

PUN10

Pipe Union Pipe Union with SS Spiral wound gasket.

PMO (bar) TMA (ºC) Size
148 / 370 DN15~80

PVB – Vacuum Breaker

PVB10

Complete SS construction, AISI 304,
End conns. : Screwed NPT / BSPT / BSP

PMO (bar) TMA (ºC) Size
21 / 450 DN15

Sight Glass

PG71

Sight Glass Sight glass. Cast Iron construction (Non return type)
End conns.: Screwed NPT / BSPT / BSP


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
16 / 200 3935
5165
6090
DN15
DN20
DN25

Single Disc Non-Slam Check Valves

PC11

Single Disc Non-Slam Check Valves Single Disc Non-slam Check Valve. Complete SS construction. A351 Gr. CF8M
End conns.: Wafer type - for fitment between flanges


PMO (bar) TMA (ºC) Size
#150 / #300 DN15~100
Replacement Kits for Float & Thermostatic Steam Traps
Completely assembled modules can renew traps easily & in a short span of time without disturbing existing connections. Each module consists of the trap cover with complete float mechanism and air vent fitted in ready to install condition. Cover gasket & name plate are also included which may be needed at the point of installation.

Replacement modules are available for:

Replacement for Model Name
Spirax Sarco
Mepco
Mepco
Pennant
PRK-15
PRK-44
PRK-46
PRK-63

Thermostatic Steam Traps with Bimetallic Column

PT40

Thermostatic Steam Trap with bimetallic column with inbuilt strainer, Forged steel construction, SS internals, End conns.: Screwed NPT / BSPT / BSP / SW / FL. *PT40 Bimetal steam trap can be provided for pressures up-to 80 Bar on request.

PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
22 / 426 
30 / 426
840 
866
DN15, 20 
DN15, 20

Balanced Pressure Thermostatic Steam Traps

PT30

Balanced Pressure Thermostatic Steam Trap with inbuilt strainer. Forged steel construction, SS Internals,
End conns.: Screwed NPT / BSPT / BSP / SW / FL


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
22 / 220 686 DN15, 20

Balanced Pressure Thermostatic Steam Traps

PT31

Balanced Pressure Thermostatic Steam Trap with inbuilt strainer. Complete SS construction
End conns.: Screwed NPT / BSPT / BSP / SW

PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
22 / 220 450 DN8~20

Balanced Pressure Thermostatic Steam Traps

PT33

Balanced Pressure Thermostatic Steam Trap with inbuilt 'Y' type strainer. Forged steel construction, SS Internals
End conns.: Screwed NPT / BSPT / BSP / SW / FL


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
22 / 220 680 DN15, 20, 25

Thermostatic Steam Trap for Clean Steam Application

PT32

Thermostatic Steam Trap for Clean Steam applications. Complete SS construction.
End conns.: Triclamp end.


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
7 / 177 430 DN15, 20
PT10

Thermodynamic Steam Trap with inbuilt strainer, SS construction: A743 Gr. CA40.
End conns.: Screwed NPT/BSPT/BSP/SW/FL


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
21 / 426 440 DN15, 20
PT11
Thermodynamic Steam Trap with inbuilt strainer, SS construction: A743 Gr. CA40.
End conns.: Screwed NPT/BSPT/BSP/SW/FL

PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
42 / 426 725
1066
DN15, 20
DN25
PT11H
High capacity Thermodynamic Steam Trap with inbuilt strainer, SS construction:A743 Gr. CA40.
End conns.: Screwed NPT/BSPT/BSP/SW/FL


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
42 / 426 2280
2880
DN15,20
DN25
PT13
Thermodynamic Steam Trap with inbuilt strainer. Alloy Steel body. SS internals.
End conns.: SW/FL


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
65 / 510 590 DN15, 20
PT14
Thermodynamic Steam Trap with inbuilt strainer. Forged Alloy Steel body, SS internals,
End conns. SW / BW


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
175 / 537 630 DN15~25
PT16

Thermodynamic Steam Trap. SS construction, A743 Gr. CA40.
End conns.: Screwed NPT / BSPT / BSP / SW


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
42 / 426 759
1135
DN8~20
DN25
PT17
Thermodynamic Steam Trap with inbuilt strainer, Forged Carbon Steel body, SS internals,
End conns.: Screwed NPT / BSPT / SW / BW / Flanged


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
50 / 426 735
1138
DN15, 20
DN25
PT18

Thermodynamic Steam Trap for Universal Connector SS construction, A743 Gr CA40. (To be used with Universal connector – PU11 / PU11Y)

PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
42 / 426 850 DN15, 20
PT18V

Thermodynamic trap for universal connector in vertical design.(To be used with Universal connector – PU11 / PU11Y)

PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
42 / 426 850 DN15, 20
PT61
Float and Thermostatic Steam Trap. Cast Iron construction. SS Internals.
End conns.: Screwed NPT/ BSPT / BSP

 

PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
14 / 220 482
510
DN15, 20
DN25
PT61SS

Float & Thermostatic Steam Trap. Complete SS construction.
End conns.: Screwed NPT / BSPT / BSP / SW / FL

PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
14 / 220 482 DN15, 20
PT62

Float and Thermostatic Steam Trap. Cast Steel Construction, SS Internals.
End conns.: Screwed NPT / BSPT / BSP / SW / FL

PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
14 / 220 482
1174
5190
DN15, 20
DN25
DN40, 50
PT63
H Pattern Float and Thermostatic Steam Trap. Cast Iron construction. SS Internals.
End conns.: Screwed NPT / BSPT / BSP


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
8.5 / 220 745
1285
2035
DN20, 25
DN32
DN40, 50
PT64

Float and Thermostatic Steam Trap. Cast Iron construction; SS Internals,
End conns.: Screwed NPT / BSPT / BSP

PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
8.5 / 220 2034
3011
DN32,40
DN50
PT64H
High capacity Float and Thermostatic Steam Trap. Cast Iron construction; SS Internals,
End conns.: Screwed NPT / BSPT / BSP


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
3.5 / 220 9350 DN50
PT65
Float and Thermostatic Steam Trap. Cast Iron construction; SS Internals,
End conns.: Screwed NPT / BSPT / BSP


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
14 / 220 1174
5190
DN25
DN40, 50
PT65H

High capacity Float and Thermostatic Steam Trap. Cast Iron construction; SS Internals.
End conns.: Screwed NPT / BSPT / BSP

PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
14 / 220 17430 DN40, 50
PT66
High capacity Float and Thermostatic Steam Trap. Cast Steel construction; SS Internals.
End conns.: Screwed NPT / BSPT / BSP / SW / FL


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
14 / 220 17430 DN40, 50
PT67
High capacity float operated trap designed for draining condensate from low to medium pressure heating & process equipment.
End Connection: Flanged #150, #300


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
2 / 220
5 / 220
12.5 / 220
95000
60000
51000
DN 80, 100, 150
DN 80, 100, 150
DN 80, 100, 150
PT21
Inverted Bucket Steam Trap. Cast iron construction. SS Internals. Vertical configuration.
End conns.: Screwed NPT / BSPT / BSP


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
17.5 / 220 350
530
2500
2600
DN15
DN20
DN25
DN40
PT22

Inverted Bucket Steam Trap. Cast iron construction. SS Internals. Horizontal configuration. End conns.: Screwed NPT / BSPT / BSP

PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
10.5/ 220 265 DN15, 20
PT23
Inverted Bucket Steam Trap with integral strainer. Cast iron construction. SS internals. Horizontal configuration.
End conns.: Screwed NPT / BSPT / BSP


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
11 / 220
12.5 / 220
14 / 220
280
390
565
DN15
DN20
DN25
PT23L
Inverted Bucket Steam Trap with integral strainer. Cast iron construction. SS internals. Horizontal configuration.
End conns.: Screwed NPT / BSPT / BSP


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
10 / 220 260 DN20,25
PT24
Inverted Bucket Steam Trap for high pressure steam systems. Vertical configuration.
Cast Steel construction. SS internals.
End conns.: SW / FL


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
65 / 510 3860 DN15, 20, 25, 40, 50
PT25
Inverted Bucket Steam Trap with inbuilt strainer. Cast Steel construction.
SS Internals, Horizontal configuration.
End conns.: Screwed NPT / BSPT / BSP / SW / FL


PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
25 / 426 430
1800
2500
10800
DN10,25
DN20,25
DN25
DN40,50
PT26
Inverted Bucket Steam Trap with inbuilt strainer. Cast Steel construction. SS Internals, Horizontal configuration.
End conns.: Screwed NPT / BSPT / BSP / SW / FL.

PMO (bar) TMA (ºC) Capacity at PMO (kg/hr) Size
11 / 426
12.5 / 426
280
390
DN15
DN20,25
 
 
Ball Valves  | Investment Casting Ball Valves | Gate Valves | Globe Valves | Non Slam Check Valves |
Butterfly Valves | Non Return Valves | Thermodynamic Steam Trap | Pipe Fittings & Flanges |
Pennant Engineering Steam Solutions | Pennant Flow Control Products | Pennant Steam Traps and Pipeline Accessories |